binder content

Experimental results indicate that the optimized binder content and ingoing temperature of airflow are 50 ml/ kg and 240 ℃, respectively.

SiC粉体在喷雾造粒时最佳粘合剂含量和进口热风温度分别为50ml/kg和240℃。

Relationship between resin binder content and properties of automotive friction materials

树脂粘结剂含量对汽车摩擦材料性能的影响

It was shown that, complex figure W-skeleton with homogeneous porosity distribution can be obtained with 35% ( in volume) binder content and high temperature.

结果表明，添加35%体积分数的粘结剂并在压制过程中提高压制温度会明显改善钨骨架孔隙度分布的均匀性；

SiC powders were treated by spray pelletization, and the influences of processing conditions and binder content on the crushing behavior of SiC granule during compaction were investigated.

采用压力喷雾造粒的方式对SiC粉体进行喷雾造粒处理，研究了喷雾造粒过程中工艺条件和浆料中粘合剂含量对成型过程中粉料颗粒破碎行为的影响。

Different body molding pressure, optimal value ceramic binder content is different.

不同的坯体成型压力下，陶瓷粘结剂含量最优值是不同。

New Method to Calculate Initial Asphalt Binder Content for Stone Matrix Asphalt

沥青玛蹄脂碎石初始沥青用量的计算方法

The propagation rate of crack also decreases with increasing the binder content of cermets.

随着金属陶瓷中金属相含量的增加,裂纹扩展速率降低.